SAFETY VALVES
Tags: safety valves
SAFETY VALVES
The process and rate of manufacture can evolve, in its entirety or in part, without changing the preparation, transfer and storage equipment.
To maintain the sterility or safety of their contents, tanks cannot be directly connected to the atmosphere.
Being subject to variations in level during the filling, dispensing and washing phases, they must therefore be equipped with breather valves.
- Wide flow cross-section and performance guarantee.
- Ease of installation
- Ability to develop the construction
- Low maintenance frequency
- Ease of cleaning
- Inerting, CIP, SIP,
- Pressure/vacuum
- Construction suitable for thermal shocks
- Open or collectable exhaust,
- Possibility of opening detection, cleaning at the valves, heating, anti-insect grill
- Minimum calibration of -2 mb and +30 mb
- DN50 to 300
- Assembly delivered tested and proven, with calibration certificate
SOREVI
Specially designed for winemaking facilities, our SOREVI valve guarantees your tanks are perfectly inerted.
With its clean design, it fits perfectly into your winery.
High-performance, the Sorevi provides an instant airflow both at pressure and at negative pressure.
Cost optimization and immediate availability are its undeniable strengths.
TECHNICAL CHARACTERISTICS:
- Calibration -1mbars / +30mbars
- ½ ferrule construction clamp DN76
- Free exhaust
- 1.4404 stainless steel wetted parts (316L)
- Silicone membrane and seal
- Enhanced performance
- Wide flow section
- Easy to maintain
- Shiny, polished finished
- Individually packed
BREATHING OR SAFETY VALVE
To adapt to the level variations, on the filling/racking and washing phases, our breather valves or louvered vents come in pressure and/or negative pressure versions.
In order to guarantee performances adapted to each process, we offer a wide range, in terms of both sizing and options, meeting the traceability and quality requirements of the agri-food, cosmetics and pharmaceutical industries.
TECHNICAL CHARACTERISTICS:
- Inerting, NEP, SIP, pressure/negative pressure.
- Constructions resistant to thermal shocks.
- Minimum calibration from -2mb to - 500mb and +30mb to +500mb
- DN50 to 300
- Free or collectable exhaust,
- Possible to detect opening, cleaning at valve level, heating, insect screen.
- Unit delivered, tried and tested with calibration certificate.